To complete this treatment successfully the surface to be treated must be clean and free from grease and other contaminants.

Step 1. Clean your bath as you would normally with a suitable bathroom cleaner rinse and dry.

Step 2. Place the plug in the bath and using the gloves provided spray Safe Bath Cleaner in the bath.(about 5 squirts) Now with the scourer provided gently rub the liquid around the bath covering all of the base of the bath including the curve for about 2 minutes.

Step 3. Rinse the bath completely with cold clean water, and dry the bath.

Step 4. Place the plug in the bath and using the gloves provided Spray Safe bath into the base of the bath or shower. Now with the scourer provided briskly rub the liquid around the bath covering all of the base of the bath for about 3 minutes.

Step 5 . Now check for resistance still wearing the gloves. If you do not notice any change repeat step 4 and 5 one more time.

Step 6. Now repeat step 3. Your bath should now have superior slip resistance without the glove on make the bath wet and place your palm on the bath floor and try to turn through 90 degrees this should not be easily  achieved. Your application was successful, now you can feel safe when you take a bath or shower.